Bowers Industrial is a
Provider of Coating and Lining Products
for Industrial and Commercial Businesses

All Categories > Abrasion/Structural Repair Products

Abrasion/Structural Repair Products


DURO-WEAR Heavy Duty Wear Resistant Lining

DURO-WEAR is a specially formulated 100% solids epoxy lining, used for the protection and repair of areas subjected to severe abrasion and impact. Areas coated with DURO-WEAR ore tough, abrasion and chemically resistant to a wide range of environments.

Colors
DURO-WEAR is dark grey in color. Other colors are available by special order.


EXP-THIXSET Novolac Ceramic Putty

EXP-THIXSET is a more chemical and higher temperature resistant version of either SAR or HAR used primarily in areas operating at higher temperatures and requiring better chemical resistance. Applications include acid tank repair, boiler skirts or refinery evaporator vessels.


HAR Carbide Putty

HAR is a more abrasion resistant putty than SAR, which is used primarily in areas requiring more resistance to fine slurries either in liquid or powder form. Common applications are in coal mills, chutes, ash hoppers or deflector plates in FGD systems.


SAR Ceramic Putty

SAR is a versatile easy-to-use rebuilding putty with excellent abrasion and chemical resistance. This product is heavily filled with aluminum oxide and can be built up to an inch in thickness or more. Typical applications are for rebuilding of pump casings, slurry tanks, weld seams or anywhere requiring the restoration of metal components.


EAC Ceramic Putty

EAC is a brushable and versatile maintenance material, which has excellent resistance to both acids and caustics as well as having excellent abrasion resistance. It is primarily used to resurface any component requiring both abrasion and chemical resistance such as tanks, heat exchangers, valve or pump internals.


EXP Novolac Ceramic Lining

EXP is a higher chemical and temperature resistant version of the EAC used in the most aggressive of chemical environments.


ELASTUFF 160 - 100% Solids Fluid Applied Elastomeric Polyurethane Coating System

A seamless, fluid-applied 100% polyurethane elastomer membrane system designed for application over concrete and/or steel surfaces. The coating system shall be a 1:1 ratio (A:B), fast set, 2-component hydrophobic polyurethane elastomer, containing no silica fillers or extenders. It shall have been tested and approved by an independent testing laboratory and shown to comply with Department of Health Services (DOHS) and Environmental Protection Agency (EPA) Standards for leachates -- the Purgeable Priority Pollutant Analysis. Approved system shall be UNITED COATINGS' ELASTUFF 160 Concrete or Steel Coating System consisting of UNITED CLEANING CONCENTRATE (UCC), UNI-CRETE, UNI-TILE SEALER, UC-30 JOINT FABRIC and ELASTUFF 160 100% solids polyurethane elastomer.


Duromar HPL-2136 CNT High Performance Lining

DUROMAR HPL-2136 CNT is a 100% solids, carbon nanotube reinforced, 2-part epoxy coating system. This product was engineered to enhance the structural integrity and reinforce badly damaged or corroded structures. This high flexural strength coating may be applied over concrete or steel up to 250 mils in a single coat to provide a continuous, high strength, erosion resistance reinforcement.

All Duromar products are formulated based on over 25 years of experience, laboratory tests, material data, field installations, and technical publications, which we believe to be, to the best of our knowledge, accurate and reliable. This information is intended to be used for guidance only. Because the only true reliable test is one that is in actual operation, Duromar with make available at no charge samples of materials for that testing purpose. Duromar, Inc. has no control over either the quality or condition of the substrate, or the many factors affecting the use and application of the product. Duromar, Inc. does, therefore, not accept any liability arising from loss, injury, or damage resulting from such use or the contents of this data sheet (unless there are written agreements stating otherwise). The data contained herein is liable to modification as a result of practical experience and continuous product development. This data sheet replaces and annuls all previous issues, and ft is, therefore, the user's responsibility to ensure that this sheet is current prior to using the product.