Bowers Industrial is a
Provider of Coating and Lining Products
for Industrial and Commercial Businesses

All Categories > Chemical Resistant Caulking and Joint Sealants > Fluorodyn™ Caulk made with Viton® > Item # - Fluorodyn™

Item # Fluorodyn™, Fluorodyn™ Caulk made with Viton®

THERMODYN™ CORPORATION introduces the ideal solution for splicing fluroelastomer parts and for use as a coating to prevent corrosion in virtually all environments. This revolutionary caulk, based on Viton® fluoroelastomer and produced in conjunction with DuPont Dow® Elastomers, provides excellent sealing for flanges or lining in pipe.Fluorodyn™ Caulk made with Viton® is compounded with 75% solids making it an easy to apply, single component caulk. This advanced compound system provides excellent corrosion resistance in the uncured state, as well as increased resistance after curing, to virtually all chemicals, including nitric, sulfuric and hydrochloric acids. Fluorodyn™ Caulk made with Viton® is recommended for use in harsh, corrosive environments that require flexibility, leak-proof sealing, and high resistance to permeation.

Fluorodyn™ Caulk is available only from Thermodyn in the following sizes: 2.5 oz. (71 ml) tube, pint (320 ml), quart (850 ml) caulking tubes with resealable applicator, gallon (3.8 L), 5 gallon (19 L), and economical 55 gallon (208 L) drum.

Packaging1 gal drum
2.5 oz. (71 ml) tube
5 gal drum
55 gal drum
Product Features
  • Easy to use
  • Factory loaded re-sealable cartridges, convenient 2.5 oz. (71 ml) tube, 1 gal, 5 gal, 55 gal drum
  • 75% solids by weight
  • Low permeability & no porosity
  • Temperature good to 450ºF (244ºC)
  • 1655 psi tensile strength
  • 285% elongation
  • Various colors (white, brown)
Benefits
  • No mixing, no mess
  • Indefinite product life eliminates expensive Viton® waste
  • Caulk will not break down in harsh conditions
  • Assures corrosion protection
  • Exceeds most high temperature caulks
  • Great bonding properties
  • Very flexible

Targeted Applications
  • Chemical resistance
  • Corrosion resistance
  • Aliphatic, aromatic, and halogenated hydrocarbon resistance
  • Flue duct expansion joint repair
  • Viton® repair
  • Resistant to ozone and UV light
  • Protects mental
  • Seals concrete
  • Environmental protection
  • Adheres to all metals, concrete, glass and ceramics
  • High temperature
  • Sealing flanges
Solids Content by WeightFluorodyn™ Caulk made with Viton® - 75% 
Old standard two part systems - 65 % to 70%
Tensile StrengthFluorodyn™ Caulk made with Viton® - 1655 psi 
Old standard two part systems - 1200 psi
Ultimate ElongationFluorodyn™ Caulk made with Viton® - 285% 
Old standard two part systems - 125%
Service Temperature (Exceeds)450 ºF
244 ºC
Concentrated Sulfuric AcidFluorodyn™ Caulk made with Viton® - +6% 
Old standard two part systems - +12%
Concentrated Nitric AcidFluorodyn™ Caulk made with Viton® - +8% 
Old standard two part systems - +15%
Concentrated Hydrochloric AcidFluorodyn™ Caulk made with Viton® - +3% 
Old standard two part systems - +5%
Concrete AdhesionFluorodyn™ Caulk made with Viton® - 360 psi 
Old standard two part systems - 140 psi
Pot Life @ 75ºF (22ºC)Fluorodyn™ Caulk made with Viton® - Indefinite 
Old standard two part systems - 4 hours
Required MixingFluorodyn™ Caulk made with Viton® - No 
Old standard two part systems - Yes
Application MethodsFluorodyn™ Caulk made with Viton® - Trowel or Factory loaded cartridge 
Old standard two part systems - Trowel or Customer loaded cartridge