Bowers Industrial is a
Provider of Coating and Lining Products
for Industrial and Commercial Businesses

All Categories > Industrial Pipe Coatings > 2510 High Performance Lining > Item # - PL-2510

Item # PL-2510, 2510 High Performance Lining

General Description
DUROMAR HPL-2510 is an outstanding, versatile and easy to use 100% solids material. It can be used for circulating water pipe, sewage treatment systems, or process water tanks. It can be applied by brush, roller or with conventional spray equipment.

Chemical Description
Multi-functional epoxy with a uniquely modified amido amine hardener.

Number of Components2
Visual AppearanceHigh Gloss
Density1.24
Solids by Weight100 percentage
pH Range2.0 - 14.0
Inorganic AcidsVery Good
Organic AcidsVery Good
AlkalisExcellent
SolventsGood
HydrocarbonsGood
Max. Dry Operating Temperature275 ºF
Functional Cure48 hours
Full Cure120 hours
Repair SystemEAC
Surface PrepSSPC-10
AdhesionExcellent
FlexibilityGood
Pot Life at 70 ºF45 min.
EquipmentAirless, Brush, Roller
Number of Coats2/3/2016 12:00:00 AM
Theoretical Coverage Per Gallon40 mil. sq. ft.
Film Thickness Per Coat10 mils min.
30 mils max.
Maximum DFT90 mils
Recoat Time at 70 ºF120 hours max.
6 hours min.
Min. Application Temperature60 ºF
Mixing Ratio by Weight2.4:1 (B/A)
Mixing Ratio by Volume1.8:1 (B/A)
Dry to Touch8 hours
Force Curing
Force cures are recommended for severe service conditions as both physical and chemical properties are enhanced. Force curing should not start until material has firmly set. Contact DUROMAR for specific instructions.
StorageThis product has a minimum shelf life of one year when stored in a dry area at 50 ºF - 100 ºF in the original sealed container.
Handling and Safety
Warning Eye and skin irritant. May cause dermatitis and sensitization.

Always read and understand the product MSDS.

Avoid contact with eyes, skin or clothing. Avoid breathing vapor, mist or spray. Use with good ventilation.

First Aid
In case of contact:
Eyes: Immediately flush with water for at least 15 minutes.
Skin: Immediately remove from skin with dry cloth followed by thorough washing with soap and water.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen.
Ingestion: Give large quantity of milk or water, induce vomiting. Contact a physician immediately.