Bowers Industrial is a
Provider of Coating and Lining Products
for Industrial and Commercial Businesses

All Categories > Steel / Tank Linings and Coatings > 1110-PW High Performance Lining > Item # - HPL-1110-PW

Item # HPL-1110-PW, 1110-PW High Performance Lining

General Description
DUROMAR 1110-PW is a low viscosity coating used in potable water tanks. It is certified to the ANSI/NSF 61 standard. It may be used on concrete or steel tanks.

Chemical Description
Multi-functional epoxy with a uniquely modified alkyl-amine.

Visual AppearanceHigh Gloss
Solids by Weight100 percentage
pH Range3.0 - 12
Inorganic AcidsGood
Organic AcidsGood
Max. Dry Operating Temperature250 ºF
Functional Cure60 hours
Full Cure120 hours
Repair SystemEAC
Surface PrepSSPC-5
Pot Life at 70 ºF45 min.
EquipmentBrush, Roller, Airless Spray
Number of Coats2 - 3
Theoretical Coverage Per Gallon40 mil. sq. ft.
Film Thickness Per Coat15 mils max.
8 mils min.
Maximum DFT45 mils
Recoat Time at 70 ºF120 hours max.
8 hours min.
Min. Application Temperature60 ºF
Mixing Ratio by Weight3.3:1 (B/A)
Mixing Ratio by Volume2.6:1 (B/A)
Dry to Touch9 hours
Force Curing
Force cures can be used to accelerate the cure or to enhance both physical and chemical properties. Force curing should not start until material has firmly set. Contact DUROMAR for specific instructions.
StorageThis product has a minimum shelf life of one year when stored in a dry area at 50 ºF - 100 ºF in the original sealed container.
Handling and Safety
Warning Eye and skin irritant. May cause dermatitis and sensitization.

Always read and understand the product MSDS.

Avoid contact with eyes, skin or clothing. Avoid breathing vapor, mist or spray. Use with good ventilation.

First Aid
In case of contact:
Eyes: Immediately flush with water for at least 15 minutes.
Skin: Immediately remove from skin with dry cloth followed by thorough washing with soap and water.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen.
Ingestion: Give large quantity of milk or water, induce vomiting. Contact a physician immediately.