Bowers Industrial is a
Provider of Coating and Lining Products
for Industrial and Commercial Businesses

All Categories > Steel / Tank Linings and Coatings > 2221 High Performance Lining > Item # - HPL-2221

Item # HPL-2221, 2221 High Performance Lining

General Description
DUROMAR HPL-2221 is a medium viscosity product with outstanding abrasion resistance, impact resistance, and flexibility. It can be used for rail cars, ash hoppers, slurry tanks, secondary containment, traveling water screens, or anywhere requiring flexibility, abrasion and chemical resistance. It is designed to be applied by hand or with plural component spray equipment.

Chemical Description
Multi-functional epoxy with a uniquely modified aliphatic/cycloaliphatic amine hardener.

Components2
Visual AppearanceHigh Gloss
Density1.61
Solids by Weight100 percentage
pH Range1.5 - 14.0
Inorganic AcidsVery Good
Organic AcidsVery Good
AlkalisExcellent
SolventsGood
HydrocarbonsExcellent
Max. Dry Operating Temperature375 ºF
Functional Cure24 hours
Full Cure120 hours
Repair SystemEAC
Surface PrepSSPC-10
Tabor Abrasion (mg) (C-17 at 1 kg.)12
AdhesionExcellent
FlexibilityExcellent
Pot Life at 70 ºF25 min.
EquipmentBrush, Roller, Airless Spray
Number of Coats2 - 3
Theoretical Coverage Per Gallon40 mil. sq. ft.
Film Thickness Per Coat10 mils min.
30 mils max.
Maximum DFT90 mils
Recoat Time at 70 ºF24 hours max.
3 hours min.
Min. Application Temperature40 ºF
Mixing Ratio by Weight4:1 (B/A)
Mixing Ratio by Volume2:1 (B/A)
Dry to Touch4 hours
Force Curing
Force cures are recommended for severe service conditions as both physical and chemical properties are enhanced. Force curing should not start until material has firmly set. Contact DUROMAR for specific instructions.
StorageThis product has a minimum shelf life of one year when stored in a dry area at 50 ºF - 100 ºF in the original sealed container.
Handling and Safety
Warning Eye and skin irritant. May cause dermatitis and sensitization.

Always read and understand the product MSDS.

Avoid contact with eyes, skin or clothing. Avoid breathing vapor, mist or spray. Use with good ventilation.

First Aid
In case of contact:
Eyes: Immediately flush with water for at least 15 minutes.
Skin: Immediately remove from skin with dry cloth followed by thorough washing with soap and water.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen.
Ingestion: Give large quantity of milk or water, induce vomiting. Contact a physician immediately.