Bowers Industrial is a
Provider of Coating and Lining Products
for Industrial and Commercial Businesses

All Categories > Concrete Coatings, Concrete Paint Coatings, Concre > 4320 High Performance Lining > Item # - HPL-4320

Item # HPL-4320, 4320 High Performance Lining

General Description
DUROMAR HPL-4320 is a high functionality, 100% solids novolac material, designed for concentrated sulfuric acid and other inorganic acid service. It can be applied by hand, but it is most efficiently applied over large areas by plural component airless. Requires elevated temperature cure.

Chemical Description
Multi-functional epoxy with a uniquely modified cycloaliphatic amine hardener.

Pot Life at 70 ºF20 min.
Components2
Visual AppearanceHigh Gloss
Density1.31
Solids by Weight100 percentage
pH Range0.5 - 14.0
Inorganic AcidsExcellent
Organic AcidsVery Good
AlkalisExcellent
SolventsVery Good
HydrocarbonsExcellent
Max. Dry Operating Temperature375 ºF
Functional Cure48 hours
Full Cure168 hours
Repair SystemEXP
Surface PrepSSPC-5
AdhesionExcellent
FlexibilityGood
EquipmentBrush, Roller, Plural Component
Number of Coats2 - 3
Theoretical Coverage Per Gallon40 mil. sq. ft.
Film Thickness Per Coat10 mils min.
30 mils max.
Maximum DFT60 mils
Recoat Time at 70 ºF24 hours max.
3 hours min.
Min. Application Temperature65 ºF
Mixing Ratio by Weight2.5:1 (B/A)
Mixing Ratio by Volume2:1 (B/A)
Dry to Touch3 hours
Force Curing
Force cures are recommended for severe service conditions as both physical and chemical properties are enhanced. Force curing should not start until material has firmly set. Contact DUROMAR for specific instructions.
StorageThis product has a minimum shelf life of one year when stored in a dry area at 50 ºF - 100 ºF in the original sealed container.
Handling and Safety
Warning Eye and skin irritant. May cause dermatitis and sensitization.

Always read and understand the product MSDS.

Avoid contact with eyes, skin or clothing. Avoid breathing vapor, mist or spray. Use with good ventilation.

First Aid
In case of contact:
Eyes: Immediately flush with water for at least 15 minutes.
Skin: Immediately remove from skin with dry cloth followed by thorough washing with soap and water.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen.
Ingestion: Give large quantity of milk or water, induce vomiting. Contact a physician immediately.